©
2012 PACE Incorporated, Southern Pines, NC All Rights Reserved. Printed in the USA
www.paceworldwide.com
ENTERING CALIBRATION MODE
2. Place POWER Switch in the “OFF” (0) Position
3. Press and hold the Tip Temperature Set and
Scroll Down Keys.
4. Place POWER Switch in the “ON” (I) Position.
All of the system LEDs will light. The
Temperature Display will read “888” and change
to read “1-X”.
5. Release the Tip Temperature Set and Scroll
Down Keys. The Temperature Display will now
read “CAL” and only the three Channel LEDs will
remain lit signifying that the system is now in
calibration Mode
1
