Pace foxtel, User Manual, Page: 79 / 86

74
Using your FOXTEL Personal Digital Recorder
Solving problems
Your remote control
isn’t working. Something is between
the remote control
and your FOXTEL
PDR. Make sure you point your remote control directly at
your FOXTEL PDR and that nothing is between it
and your FOXTEL PDR. The ir receive light on
your FOXTEL PDR’s front panel should flash each
time you press a remote control button.
The batteries are flat
or inserted the wrong
way round. Check the batteries and replace them if necessary.
Your FOXTEL PDR
may be in ‘loop-
through’ mode
because you pressed
the
av button (see
page 59).
If you want to watch digital TV, press FOXTEL on
your remote control to return to viewing FOXTEL.
You can’t use your
FOXTEL remote
control to operate
your FOXTEL PDR. Your FOXTEL PDR
may be in ‘loop-
through’ mode
because you pressed
the
av button (see
page 59).
If you want to watch digital TV, press FOXTEL on
your remote control to return to viewing FOXTEL.
You’ve forgotten
your PIN. Call your FOXTEL provider for advice.
You are having
difficulties using a
FOXTEL interactive
feature, such as
Active or Box Office. There may be a
problem with your
telephone line. Check that the telephone lead between your
FOXTEL PDR and the telephone point is properly
plugged in. (Always switch your FOXTEL PDR off
at the power supply before plugging or unplugging
any other equipment.)
Check that the telephone line is working by picking
up your telephone and listening for the tone.
Problem Possible cause Suggested solution