Pace foxtel, User Manual, Page: 37 / 86

32
Using your FOXTEL Personal Digital Recorder
❖
Recording channels without programme
listings
Some channels, for example radio channels, do not provide
programme listings in the i-search banner or TV Guide. However, you
can still use your FOXTEL PDR to record these channels, by using the
Setup screens to set up the recording.
◆
First, press the setup button on your remote control to display
the Setup banner (see also page 41), then press
D
to highlight
‘System Setup’ and press OK . The Setup screen displays (see
also page 43).
◆
Press
D
to highlight ‘Manual Recording’ then press OK . The
Manual Recording screen displays.
You set up the recording as follows:
1. Choose the channel to record, by either using the number
buttons to enter a channel number, or by using
L
or
R
to look
through the channel names.
2. Press
D
to highlight ‘Day’, then use
L
or
R
to select the day on
which you want to record the channel you have chosen.
3. Press
D
to highlight ‘Start Time’, then use the number buttons
to enter the time you want the recording to start. You should
use the ‘12-hour clock’, then use
L
or
R
to choose AM or PM.
For example, to record from 7:30 in the evening, enter ‘ 0 7 3 0 ’
then choose ‘ PM ’.
While ‘Start Time’ is highlighted, if you make a mistake, you can
press
back to delete the numbers you have entered and start
again.
4. Press
D
to highlight ‘End Time’, then, in the same way as you
entered the Start Time, use your remote control to enter the
time you want the recording to finish.
Recording programmes