SETUP
55
Setup
Picture Settings
The standard (default) setting for each item is marked with *.
To confirm any changes, highlight ‘Save New Settings’ then press
select
, or to cancel, press
back
.
If you press the
red
(Reset all settings) button, the settings will change
to the
standard
settings (
NOT
the settings made by your installer).
Item
Settings
Comments
Aspect ratio control
By TV,
By STU *
For most TVs you should set this to ‘By STU’ (by set-top unit), then
select your TV Type and Programme Display preference.
‘By TV’ allows your TV to control how the picture is displayed, provided
that your TV is capable of controlling the picture, and that your
FOXTEL PDR is connected to your TV via a SCART to SCART lead.
TV Type
(Only available if the
Aspect ratio control has
been set to ‘By STU’.)
4:3 *
Setting for ‘standard’ (4:3) TVs.
16:9
Setting for ‘widescreen’ (16:9) TVs.
16:9 Programme
Display
(Setting for how
widescreen (16:9)
programmes display on
a standard (4:3) TV -
only available if the TV
Type has been set to
4:3)
Centre Cut *
The centre portion only of any widescreen (16:9) transmissions will
display on a standard (4:3) TV.
14:9
You see a wider portion of a widescreen (16:9) transmission than with
‘centre cut-out’, but you do not see the entire picture. The picture does
not fill the screen.
Letter Box
The whole of any widescreen transmissions will display on a standard
(4:3) TV, but the picture does not fill the screen.