PENTA-7500S Belt Grinder
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
9
5.0 Maintenance
5.1 Introduction
The
PENTA 7500S
requires very minimal maintenance. However, to increase the life
of the grinder, it is suggested that the unit be rinsed after use.
5.2 Cleaning Inside Cabinet
The inside of the cabinet where the belt mechanism is located should be cleaned and
dried to avoid possible corrosion. It is advised to leave the side panel open when
finished using the machine to reduce humidity and allow air flow. Do not use chemical
or cleaning abrasives on the inside of the cabinet.
5.2 Cleaning Outside Cabinet
The outside cabinet should be cleaned occasionally with a moist cloth. Do not use
any chemicals or cleaning abrasives while cleaning.
