Pace Technologies PENTA-7500S Instruction Manual Download Page 13

Page: 13 / 18

PENTA-7500S Belt Grinder

NSTRUCTION

ANUAL

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

▲

3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: https://www.metallographic.com

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

4.4 Grinding Samples

After mounting the sample and placing the sample holder inside the slot start the

machine. Activate the water and adjust flow to preferred levels. Push down on the

sample holder handle to apply pressure to the sample. Do not move sample holder

back and forth during grinding.

The holder is spring enabled. If pressure is released to sample will not grind on the

paper

Pressure

Summary of Contents for PENTA-7500S



















Search results

Summary of Contents for PENTA-7500S

Reviews:

Related manuals for PENTA-7500S

Brands by name

Popular brands

Pace Technologies PENTA-7500S, Instruction Manual

Search results

Summary of Contents for PENTA-7500S

Reviews:

Related manuals for PENTA-7500S

Brands by name

Popular brands