PENTA-7500S Belt Grinder
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
3
2.0 Unpacking, Shipping and Installation
When moving machine, lift by the base.
The
PENTA-7500S
is constructed with sensitive
electronic and mechanical components.
DO NOT DROP.
!
Caution: Use care when moving machine
The PENTA-7500S is shipped in a customized box. Unpack the foam, which is covering
the machine, from the box. Then remove the unit from the remaining foam.
2.1 Unpacking
2.3 Installation
!
Install unit carefully! Improper installation voids warranty.
The
PENTA 7500S
should be placed on a flat stable surface.
Connect to water supply, drain and electrical outlet (110V or 220V, note voltage has
been prewired at the factory). After water and drain are completed, the system is ready
for operation.
2.2 Shipping
Measures WxDxH: 21" x 29" x 22" (535 x 740 x 560 mm)
Weight: Weight with crate (approximately 140 lbs).