3.
To shorten the tether, pull on the
strap.
Komfort Latch Feature
WARNING
DO NOT set the Komfort Latch with
too much slack. Too much slack may
reduce the effectiveness of the seat
belt. Failure to comply may result in
death or personal injury.
To eliminate cinching, simply activate the
Komfort Latch device located on the seat
belt webbing at the appropriate time:
1.
Adjust the seat to its proper driving
position.
2.
Latch the seat belt.
3.
If available, adjust the seat belt
height adjuster to a comfortable
driving position.
4.
While seated appropriately, push
the "on" button to engage the
Komfort Latch.
5.
Learn forward in the seat until you
hear a "click."
6.
Return to normal driving position,
and the Komfort Latch maintains
the preset amount of tension relief.
More information and video tutorials can be
found at: http://www.clicktugsnug.com/
To disengage the mechanism unbuckle the
seat belt and then press the
OFF
button of
the Komfort Latch or tug on the shoulder
strap.
Belt Damage and Repair
Damaged belts in the cab must be
replaced. Belts that have been stretched,
cut, or worn out may not protect you in an
accident.
If any seat belt is not working properly, see
an Authorized Service Center for repair or
replacement.
For further information on seat belts and
seat belt maintenance, see
on page 247.
Sleeper Bunks and Restraints
This vehicle comes equipped with a bunk
restraint for the primary lower bunk and the
optional upper bunk. These restraints
should be used whenever the bunks are
occupied by a person while the vehicle is in
motion. The sleeper bunk restraint is
intended to reduce the risk of being thrown
from the bunk in a crash. This device is not
designed to hold the occupant in a fixed
position on the bunk and may not prevent
all injuries in the event of a crash.
SAFETY - Seat
30
Y53-6126-1A1 (01/21)
1
Summary of Contents for Peterbilt 567 2021
