manualshive.com logo in svg

Paccar Peterbilt 567 2021, Manual

The Paccar Peterbilt 567 2021 boasts exceptional performance and cutting-edge features. Unlock the full potential of this powerful machine with our comprehensive user manual, available for free download. Accessible directly from manualshive.com, our manual equips you with all the necessary information to optimize your Peterbilt experience.

Share
Download
background image

City Horn

Depressing the horn pad in the center of
the steering wheel activates the electric
horn. Look for this symbol on the center
pad of the steering wheel.
To use the electric horn, press the button in
the center of the steering wheel, which is
the standard location for electric horns.
Your vehicle may be equipped with
optional air horns. To operate, pull on the
lanyard extending from the overhead
header panel.

Door Mounted Mirror
Controls

If your vehicle is equipped with power
mirrors, the mirror controls will be located
on the driver-side door pad. Mirrors can be
adjusted in four directions. To provide good
visibility, adjust the mirror so the side of
your vehicle appears in the inboard part of
the mirror.

NOTE

If  your  vehicle  is  equipped  with  digital
side-view  mirrors  (option)  refer  to  the
PACCAR  Digital  Vision  System  with
Mirrors operator's manual.

1.

Mirror heat

2.

Mirror adjust

3.

Left or right mirror adjust selector

4.

Window controls

5.

Door lock control

Mirror Heat Switch

Your vehicle may be equipped with
optional heated mirrors. Mirror heat is
controlled by the mirror heat switch button.
If the vehicle has optional hood-mounted
heated mirrors, this switch will also activate
heat to those mirrors. If the vehicles has
optional LED headlights, this switch will
also activate heat to those headlights.

Power Mirror Switch

If your vehicle is equipped with power
mirrors, the directional controls for both
mirrors are located near the top of the
driver-side door trim pad.

Power Door Lock Switch

Power door lock rocker switches are
located on the door pads. To lock or unlock
both cab doors as well as a sleeper door,
depress any door lock switch at the end
that displays a closed or open padlock
symbol, respectively, on the switch face.

CONTROLS - Door Mounted Mirror Controls

Y53-6126-1A1 (01/21)

113

3

Summary of Contents for Peterbilt 567 2021













































































































































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 567 2021

Taylor-Dunn TT-316 36AC Operator'S Manual preview
TT-316 36AC
Brand: Taylor-Dunn Pages: 52
DAF CF65 Service Manual preview
CF65
Brand: DAF Pages: 352
Manitou MT732ST38 Operating And Safety Instructions Manual preview
MT732ST38
Brand: Manitou Pages: 143
Manitou 6-E3 Series Operator'S Manual preview
6-E3 Series
Brand: Manitou Pages: 194
MERLO PANORAMIC User And Maintenance Manual preview
PANORAMIC
Brand: MERLO Pages: 200
WorkSmart WS-MH-PALL-010 Owner'S Operation Manual preview
WS-MH-PALL-010
Brand: WorkSmart Pages: 9
Vestil CARPET-D Instruction Manual preview
CARPET-D
Brand: Vestil Pages: 5
Still ECH 15 Original Instructions Manual preview
ECH 15
Brand: Still Pages: 104
Still EXU-S 22 Original Instructions Manual preview
EXU-S 22
Brand: Still Pages: 122
Still EXH-S 20 Original Instructions Manual preview
EXH-S 20
Brand: Still Pages: 132

Brands by name

Popular brands

Load more brands