Starting and Operating
Since each vehicle is custom-equipped, all
engine operation instructions in this
manual are general. You will want to
consult the manual for your engine to find
out details about your specific engine’s
needs. You may need to use a slightly
different procedure from the one outlined
here.
Systems Check Summary
System Check Display with TPMS
84
96
105
105
105
2
1
105
3
105
105 105
105
105
105 105
105
5
4
105
105
Once the Systems Check has completed,
the results will display in a summary. A
detailed explanation of this summary can
be viewed by accessing the Menu after a
Systems Check has completed.
Anti-theft
When enabled, the engine cannot be
started until the correct passcode has been
entered.
NOTE
Be aware that enabling Anti-theft will
require drivers that share this vehicle
to enter a passcode prior to starting
the Engine, entering the Settings sub-
menu (where Anti-theft can be disa-
bled), or altering the Favorites View.
If after five minutes the engine hasn’t been
started, the passcode must be reentered –
this precaution can be postponed in one
minute intervals by using any steering
wheel switch. If Anti-theft is disabled and
then re-enabled in Settings, the passcode
used prior to being disabled is still the
passcode. Anti-theft allows for only one
passcode per vehicle.
Starting and Warming Up
How to Start Vehicle in Normal
Weather
CAUTION
Never operate the starter motor while
the engine is running. The starter and
flywheel gears could clash or jam, se-
verely damaging them.
NOTE
Some starters are equipped with over-
crank protection. Check the Engine
Operation and Maintenance Manual
for details.
When the outside temperature is above
50°F (10°C), you can use the following
procedure. If Anti-Theft is enabled, the first
time you turn the ignition switch to START,
you will need to enter the Passcode.
1.
Set the parking brake.
2.
Put your main transmission in
Neutral.
DRIVING - Starting and Operating
Y53-6126-1A1 (01/21)
131
4
Summary of Contents for Peterbilt 567 2021
