manualshive.com logo in svg

Paccar Peterbilt 567 2021, Manual

The Paccar Peterbilt 567 2021 boasts exceptional performance and cutting-edge features. Unlock the full potential of this powerful machine with our comprehensive user manual, available for free download. Accessible directly from manualshive.com, our manual equips you with all the necessary information to optimize your Peterbilt experience.

Share
Download
background image

CAUTION

Ensure  the  tractor  and  trailer  brakes
are  engaged  prior  to  sliding  the  fifth
wheel.  Failure  to  engage  the  brakes
could  result  in  uncontrolled  sliding  of
the  fifth  wheel  and  possibly  damage
components on the tractor or trailer.

Fifth Wheel Slide Symbol

4.

Inspect and verify that locking
plungers have fully withdrawn from
the fifth wheel slide tracks.

a.

If locking plungers did not fully
withdraw, move tractor slightly
to reposition plungers and
reinspect.

b.

If plungers are still not fully
withdrawn, lower the landing
gear and deflate the rear
suspension (if available) to
lessen pressure on the slide.

Suspension Dump Symbol

5.

Release the tractor parking brake,
but keep the trailer brakes
engaged.

6.

Slowly ease tractor forward or
backward, and stop at the desired
position.

7.

Lock the slide by returning the Fifth
Wheel Slide switch to its previous
position.

8.

Inspect and verify that the locking
plungers are fully inserted into the
fifth wheel slide tracks.

a.

If the locking plungers are not
fully inserted in the track,
move the tractor slightly to
reposition plungers and
reinspect.

WARNING

Do not operate the vehicle un-
less  the  locking  plungers  are

fully  inserted  into  the  fifth
wheel  slide  track.  Operating
the  vehicle  while  the  plungers
are  not  fully  inserted  could
lead to the slide moving unex-
pectedly,  resulting  in  a  loss  of
vehicle  control  and  potentially
causing property damage, seri-
ous injury, or death.

9.

If the landing gear was lowered,
raise the landing gear.

10.

If the rear suspension was
deflated, return rear suspension to
its normal height.

Driving Tips and
Techniques

This section covers additional driving tips
and techniques on how to drive your
vehicle more efficiently.

DRIVING - Driving Tips and Techniques

Y53-6126-1A1 (01/21)

181

4

Summary of Contents for Peterbilt 567 2021













































































































































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 567 2021

DAF CF ELECTRIC Emergency Response Manual preview
CF ELECTRIC
Brand: DAF Pages: 58
AJ 31065 Operating Instructions Manual preview
31065
Brand: AJ Pages: 79
Kenworth T470 Manual preview
T470
Brand: Kenworth Pages: 110
Cantoni JOLLY 2010 User And Maintenance Handbook preview
JOLLY 2010
Brand: Cantoni Pages: 24
RAM RAM 2500 Owner'S Manual preview
RAM 2500
Brand: RAM Pages: 806
Motrec T-448HD Operator And Maintenance Manual preview
T-448HD
Brand: Motrec Pages: 51
Motrec G-320 Operator And Maintenance Manual preview
G-320
Brand: Motrec Pages: 88

Brands by name

Popular brands

Load more brands