Paccar Kenworth T800 2012, Manual

Page: 71 / 276

08/12
4-9
Section 4
Exhaust & Aftertreatment
fIGurE 4-9: Routing DEF Lines and DEF Trap
clear Back of cab supply module
The CBOC Supply Module (or Pump) standard mounting location is inside of the frame rail back of cab. Body builders
may need to relocate this component, and should follow the location and length restrictions above. Additionally the
mounting and the orientation of the Supply Module must not exceed 45° (from vertical) in two directions as shown in
Figure 4-10 below.
fIGurE 4-10: Supply Module Allowed Clocking Angles
Minimum 12” Line
Length Below
Dosing Module