Paccar DAF CF Driver Manual Download Page 322

Page: 322 / 375

323

Emergency repairs

4. Leave the tap in position B.
5. If the truck is equipped with a manually shifted gearbox, go in the cabin and move

the gear change lever firmly to fourth gear to secure the shifting mechanism.

Checking the cabin locking

When the cabin is not fully at its normal driving position (locked), the

'Cabin lock open'

warning is visible on the master display.

13.2 REPLACING THE POLY-V-BELT

Important

Always fit the same type of poly-V-belt as the one being replaced.

Checking the poly-V-belt

1. Make sure that the mark (A) on the

tensioner arm is within range:
– A new poly-V-belt must be within

range (B). Otherwise the belt is
routed incorrectly or outside its
specification.

– A used poly-V-belt must be

within range (C). Otherwise the
belt is routed incorrectly or
outside its specification.

Removal and installation of the poly-V-belt on the MX-13
engine

1. Disconnect the earth cable from the

battery.

2. Remove the front engine

encapsulation.

3. Loosen the connector of the electric

fan clutch, if fitted, and remove the
wiring from the bracket.

4. Place a 17-mm ring spanner on the hexagon of the belt tensioner.

D005256

D005115

DW63246305.book Page 323 Friday, March 22, 2019 4:54 PM

Summary of Contents for DAF CF
























































































































































































































































































































































































Search results

Summary of Contents for DAF CF

Reviews:

Brands by name

Popular brands

Paccar DAF CF, Driver Manual

Search results

Summary of Contents for DAF CF

Reviews:

Brands by name

Popular brands