manualshive.com logo in svg

Paccar DAF CF, Driver Manual

Share
Download
Paccar DAF CF Driver Manual Download Page 192

189

6

Coupling and uncoupling

CAUTION:  The status of the lock must be checked before every 
journey, the slider locks must be fully closed. In other words the 
operating cylinder must be fully retracted. 
Only start a journey if the lock is correctly closed.

Uncoupling semi-trailer

– Park the vehicle on flat and firm ground.
– Make absolutely sure that the semi-trailer is braked.
– Place wheel chocks in front of and behind the semi-trailer wheels.
– Wind down the semi-trailer supports using quick operation until the feet touch the 

ground. Switch to slow operation and wind down a few turns further. Do not lift the 
semi-trailer from the fifth wheel.

– Detach the brake pipes and cables for lighting and ABS/EBS.
– If fitted, detach the safety hook or padlock.
– Unlock the fifth wheel by pulling out the handle, as explained in the manufacturer’s 

operating, care and maintenance instructions. The jaw is now opened and ready for 
uncoupling.

– Slowly drive the tractor from under the semi-trailer.

NOTE:  On tractors with air suspension, the remote control of the air 
suspension is used for coupling and uncoupling the trailer. When coupling, 
the vehicle can be brought to the correct coupling height.

Important

After coupling or uncoupling a semi-trailer, always press the switch for normal driving 
height to automatically return to the correct 

driving height

.

D005074

DW63246305.book  Page 189  Friday, March 22, 2019  4:54 PM

Summary of Contents for DAF CF
























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands