Paccar DAF CF, Driver Manual

Page: 117 / 375

114
3
Instruments and controls
Use the Menu Control Switch to select the 'Phone' icon in the master display.
Select the 'Bluetooth phone' icon, and then select the 'Bluetooth status' icon to enable
the Bluetooth connection in the vehicle.
Pairing Bluetooth enabled phones
It is possible to pair a maximum of ten telephones via Bluetooth.
– Enable the telephone Bluetooth connection.
– Use the Menu Control Switch to select the 'Phone' icon in the master display.
– Select the 'Bluetooth phone' icon.
– Select the 'Search for phones' icon.
The telephone interface system on the truck searches for available Bluetooth
telephones.
– Select the telephone from the list of found telephones.
– Enter the PIN code when prompted.
NOTE: Use the 'Reverse search' option when the truck fails to locate a
Bluetooth-enabled telephone. The vehicle telephone interface system
broadcasts the truck chassis number that is detected by a Bluetooth-
enabled telephone. Select the truck telephone system from the Bluetooth-
enabled telephone and enter the PIN code when prompted.
When the telephone is paired, the vehicle telephone interface system reads the
telephone memory. The newly paired telephone may request permission to read the
telephone memory. This may take some time, depending on the type of telephone.
The telephone is now set to be used via the vehicle telephone interface system.
NOTE: A maximum of ten Bluetooth telephones can be paired with the
telephone interface system. Only two telephones can be connected at the
same time.
Depending on the vehicle type, the mobile telephone can be placed into a telephone
cradle. The cradle model depends on the type of mobile telephone.
There is a mounting place for the cradle behind the cover in the dashboard. See section
'Control panel'.
Depending on the type of telephone, a cradle may be available from a DAF dealer.
Removing a Bluetooth paired telephone from the vehicle telephone
interface system.
If no longer required, paired Bluetooth telephones can be removed from the vehicle
telephone interface system.
Use the Menu Control Switch to select the 'Phone' icon in the master display. Select
the 'Bluetooth phone' icon, and then select the 'Remove phones' icon. Select the
telephone to be removed from the list.
DW63246305.book Page 114 Friday, March 22, 2019 4:54 PM