manualshive.com logo in svg

Paccar DAF CF, Driver Manual

Share
Download
Paccar DAF CF Driver Manual Download Page 195

192

6

Coupling and uncoupling

NOTE:  When coupling, check the coupling head rubbers of the air pipes 
of both the truck and the trailer for possible damage.

–

Trailer coupling with automatic 
unlocking

– Pull the lever (B) up; the locking 

indicator pin (A) shoots out. The 
coupling pin is now raised and ready 
for coupling.

– Reverse the truck 

slowly

 until the 

trailer coupling closes.

Locking indicator pin (A) in unlocked 
position: coupling unsafe!

Locking indicator pin (A) fully level 
with the front: coupling safe.

– After coupling, always check 

whether the locking indicator pin (A) 
is in the locked position. See the 
manufacturer's operating 
instructions.

NOTE:  If the locking 
indicator pin (A) is not 
fully level with the front, 
the coupling is not safe 
and you must couple the 
trailer again.

– Connect the brake pipes and the 

cables for the lighting and ABS/
EBS.

D001599

A

B

D001600-2

A

D001601-2

A

DW63246305.book  Page 192  Friday, March 22, 2019  4:54 PM

Summary of Contents for DAF CF
























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands