58
Management Console Connections
To connect the main storage to external consoles, you need the following:
•
DB9 female to mini-USB cable (bundled with the package)
•
CAT5e LAN cable (user supplied)
Connecting Main Storage to External Consoles
See below table for the list of default values of the serial port.
Baud rate
38400
Data bit
8
Parity
None
Stop bit
1
Flow control
Hardware
IMPORTANT!
Always connect to the primary controller.
NOTES:
•
A null modem may be required if you are using a third-party cable.
•
For TCP/IP connection and firewall configuration, refer to your PAC Management
Software’s online help, or user manual. If your network is not running the DHCP server
protocols, you can use the default IP
10.10.1.1
if you are accessing for the first time.
Power Connections
Before connecting to a power source, ensure that all components are properly installed and the
management interfaces are properly connected.
Take a look at the list below and check the following:
1. The hard drives are correctly installed into the drive trays.
2. All drive trays are installed into the system, whether or not they contain a hard drive.
3. The system is connected to host computers, management computers, or external
networking devices with the correct cables.
IMPORTANT!
Ensure to use the power cables with at least 1.2 meters in length. DO NOT use
extension cables as the power cables are designed to connect
ONLY and DIRECTLY
to
relocatable power taps (RPTs) on server cabinets.
4. Ensure that the ambient temperature is not less than 35
o
C (with CBM).