24
Installing the Hard Drive into Drive Tray
Open the bezel by pressing the release button and gently pull out the tray.
Place the hard drive into the drive tray, making sure that the interface connector is facing the
open side of the drive tray and its label side facing up.
If you want to install a SAS drive, an installed MUX board must be removed first.
Installing a 3.5” SAS / NL-SAS / SATA Drive
Installing a 2.5” SAS / SATA Drive
Adjust the drive location until the mounting holes in the drive tray are aligned with those on
the hard drive. Secure the drive with four of the supplied flat-head screws.
Installing the Hard Drive Tray into the Enclosure
Once the hard drives have been installed in the drive trays, install the drive trays into the
system.
WARNING
Each drive bay must be populated with a tray even if it does not contain a hard drive.
An empty bay will disrupt ventilation and the system might overheat.
