64
3. Loosen the screw
(2)
at the end of the Supercapacitor.
4. Lift the Supercapacitor from the screw end at a 45
o
angle and remove it out of the
controller chassis.
5. Insert the replacement Supercapacitor at a 45
o
angle, make sure the protrusion
(1)
meets the front of the Supercapacitor. Secure the Supercapacitor with the screw
(2)
once it is in place.
6. Connect the 4-pin Molex connector of the Supercapacitor to the charge board
connector
(3)
.
7. Reinstall the controller.