12
Chassis
The chassis is rugged constructed and divided into front and rear sections. The chassis
is designed to be installed into a rack or cabinet.
Front Panel
2U Models
3U Models
•
Hard drive trays (1):
Each drive tray is hot-swappable and holds a 2.5 / 3.5-inch hard
drive. 4U systems, capable of carrying 60 hard drives have either 3 drawer (each
capable 20 hard drives) or no drawer (top loader).
•
LED Panel (2):
It contains Service / Power / Cooling Fan / Thermal / System LED.
•
Mute button / service LED (3):
The mute button is to mute an alarm when sound or to
indicate that the system requires service.
•
Rotary ID switch in JBOD systems (4):
The rotary ID switch is for users to set a
unique ID to each JBOD when connected in a multi-array environment.
•
Handles (5):
There are handles on both sides of the enclosure for users to pull / push
the enclosure out and into the cabinet when the enclosure is installed on a slide rail
rackmount system.
•
Rackmount holes (6):
There are two rackmount holes (one on each side of the
enclosure) for users to secure the enclosure onto the cabinet.
•
Hard drive status LED (7):
There is a set of hard drive status LEDs on each hard
drive tray or right hand side or below of it to indicate operation status.
•
Drawer release notch (8):
The drawer release notch is used to open each drawer.
