---------------------------------------------------------------------------------------------------------------------------------
27
4.14.2 Assign Exts. Outgoing to Certain C.O.Line / to Clear in night mode
Note: If you not use day/night function, you needn’t to set this settings.
Format: 71MN0# Assign the extensions N outgoing to use the certain C.O.line (M) in night .
71M0# All extensions can use co line M in night mode.
71M1# All extensions can not use co line M in night mode
71MN1# to restrict the EXT.N to use C.O line M in night mode.
71N2# Allow extension N use all C.O.lines in night mode.
71N3# to restrict EXT.N use all C.O.lines in night mode.
Explanation: M: C.O. line No, M =1-8 N: the Ext. No., N = 01 -32
Description: This functions allow you to assign certain CO line exclusively be accessed by certain
extensions for outgoing calls and other extensions can`t use it for outgoing calls.
1. This function is for the outgoing call and can’t change the function of C.O line Ringing
Assignment. .
2. Eg1: EXT603 can’t use C.O line 2, Ext.606 & Ext.608 can use C.O line 1 in daytime ,
you can set as follows: 702031# , 701060# ,701080#.
3. Eg2: C.O line 1 can use at night mode by Ext 601, C.O line 2 can use by Ext
607. Ext 608 .Ext 616 in night , you can set as follows: 7111#
、
7121#
、
711010#
、
712070#
、
712080#
、
712160#
。
4.15 Flexible Extension Number
4.15.1 Assign Number (Freely Change the Exts. Number) of Certain Extension
Format: 9 N abcd #
Explanation: N: the Ext. series No., N = 01 – 32 (N=01 means Ext.601 …… N=32 means Ext.632)
abcd: the new number, 3 to 4 digit number, if new Ext number not exceeding to
4-digit number, press # in the end.
Description: Change old Ext number to new Ext number “abcd”
Example: Change the No.06 Ext to 306,just input 906306#.
1. All extensions numbers can not be in duplicate.
2. The first number “a” can not same as outgoing code (9) or office code(0)
3.The length(digits) of new number must follow the extension No.1; it must be emphasized
that if the length(digits) of new number changed, all the extensions must be reset after
setting extension No.01. All the new numbers should be equal digits, and not in duplicate.
4. if the system enable the Intelligent Least-cost Routing function, the first digit of new
extension number can’t be same as the dialing-out code of special Trunk line.
Summary of Contents for CDX-CP832
Page 1: ......
