12 |
P a g e
You will be logged in as an administrator with access to all settings and functions.
Once logged in, you will automatically be directed to the Control page. You can
use the tabs on the top of the screen to navigate between the different control and
configuration pages.
Network settings
To make basic network settings click the Network tab. The network configuration
page is shown in Figure 6.
You can choose between using DHCP or static IP address here.
Enable HTTP authentication
HTTP authentication can be disabled to make HTTP communication easier for third
party applications.
Enable broadcast messages
All FNIP modules periodically send out heartbeat broadcast messages with basic
information about themselves. This helps discovery tools and mobile apps to find
them. These broadcasts can be disabled if constant traffic on the network is not
desired.
Please note disabling broadcast messages will stop the Discovery Tool and the
mobile applications from discovering the modules on the network.
Multicast address
Used to create groups of FNIP modules that react to scene activation commands
received from a module with the same multicast address.
More information about scenes can be found in the Scenes chapter.
Summary of Contents for FNIP-12xPWM
Page 3: ...3 P a g e ...
Page 13: ...13 P a g e Figure 6 Network configuration page ...
