ASSEMBLY
12
Adding / Checking Engine Oil (See fig 4)
•
Place pressure washer on a level surface.
•
Remove one or both of the crankcase dipsticks to ensure you do not overfill the engine.
•
Carefully add 1.1L (37.2 oz) of semi-synthetic SAE10W30 engine oil to empty reservoir until oil reaches the outer
edge of the oil fill hole (Crankcase Dipstick hole).
•
Be sure to replace both dipsticks before attempting to start the engine.
•
To check oil, set pressure washer on a level surface, wipe dipstick clean, then reinsert dipstick without re-threading.
FIG 4
Adding Fuel (See fig 5)
•
Set pressure washer on a clean and level surface in an area that is well ventilated.
•
Remove fuel cap.
•
Insert a funnel into the fuel tank and carefully pour unleaded petrol into the tank until fuel level reaches 1 1/2 inches
below the top of the neck.
FIG 5
10W30 OIL
CAUTION!
CAUTION!
10W40 OIL
