15
OPERATION
Stopping Pressure Washer (See Fig 10)
•
Turn the on/stop switch to the OFF position.
•
Turn the fuel valve to the OFF position.
•
Turn off water and squeeze the trigger handle to release all water pressure.
FIG 10
FIG 11
Unloader Pressure Adjustment (See Fig 11)
•
Rotate Red knob to adjust pressure.
Using the Spray Gun (See Fig 12 - 13)
•
Flip the lock tab behind the trigger up or down until it clicks to apply or remove the safety. Pull back on the trigger to
begin operating pressure washer.
•
FIG 12
FIG 13
•
Always relieve pressure from spray gun before pulling starter cord, including every failed attempt to start engine.
•
To avoid recoil, pull starter cord slowly until resistance is felt, then pull rapidly.
Pull cord recoils rapidly and pulls arm towards engine faster than you can let go which
could result in injury.
WARNING!
Unloader Pressure Adjustment
SLOT
LOCK OUT
TRIGGER
OFF
