ASSEMBLY
13
Connecting Garden Hose to Pressure Washer (See fig 6)
•
•
Inspect inlet screen and remove any debris.
•
Connect hose to water inlet and tighten by hand. There must be a minimum of 10 feet of unrestricted hose between
pressure washer and faucet or shut off valve.
•
Turn on water.
•
Purge the system’s pump of air by releasing the safety and squeezing the trigger of the spray gun.
FIG 6
Connect High Pressure Hose to Pump (See Fig 7)
•
Pull back the quick-connect collar of pump, insert the other side of the high pressure hose then release collar.
•
When high pressure hose is connected, pull on the hose to make sure it is secured.
FIG 7
Do not run pump without connecting to the water supply and turning water on. Failure to
do so could damage the pressure washer. Failure to follow these instructions will void
product warranty.
CAUTION!
