![background image](http://html1.mh-extra.com/html/p-lindberg/9065102/9065102_manual_744835067.webp)
8
MAN 9065102 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
B – CAUTION
- Read and understand operator's manual
before starting. Review safety instructions
annually.
- Turn machine off, stop and disable engine,
remove ignition key and place in your pocket, set
park brake and wait for all moving parts to stop
before adjusting, servicing, maintaining,
repairing or unplugging.
- Keep the working area clean and free of debris
to prevent slipping or tripping. Operate only on
level ground.
- Close and secure rotor cover before operating.
- Close and secure all guards, deflectors and
shields before starting and operating.
- Keep hydraulic lines and fittings tight, in good
condition and free of leaks.
- Keep hands, feet, hair and clothing away from
moving parts. Never wear loose clothing around
machinery.
- Keep driveline universal joint angles equal and
as small as possible.
- Do not point discharge at people, animals or buildings. Rotor can expel wood chips fast enough to
cause injury.
- Do not allow children, animals or unauthorized people into working area.
- Do not run machine inside a closed building to prevent asphyxiation from engine exhaust.
- Use care when feeding material into chipper. Do not send metal, bottles, cans, rocks, glass or other
foreign material into wood chipper. If foreign material enters chipper, stop the machine, turn engine off
and place ignition key in your pocket and wait for all moving parts to stop before removing material
and/or unplugging. Inspect machine for damaged or loose parts before returning to work.
- Always wear P.P.E. (Personal Protective Equipment) such as safety goggles and heavy gloves whenever
operating machine.
- Do not place hands or any body parts into feed hopper during operation.
- Do not move or transport chipper when the rotor is turning.