![background image](http://html1.mh-extra.com/html/p-lindberg/9065102/9065102_manual_744835074.webp)
15
MAN 9065102 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Assembling
The woodchipper is supplied fully assembled.
The woodchipper is mounted on the tractor’s three-point hitch and connected to the
tractor’s PTO shaft.
Lubricate well with grease all moving parts before using for first time.
Use
Since the woodchipper functions via power transmission from the tractor, the blade
rotor starts automatically when the tractor starts.
Procedure in case of trapped material
Immediately stop the tractor and disconnect the PTO. Wait until all moving parts have
stopped moving. The feed chute can now be reversed to free the trapped material.
Alternatively, the cover to the blade shaft can be opened.
Maintenance
The blade shaft must be lubricated with suitable oil every 8 operating hours.
Bolts, nuts, etc., must be checked and tightened every 20 operating hours or as
required.
Storage
The machine must be cleaned and all metal parts lubricated with a light oil to prevent
rust formation.
Transport
The machine must be made secure against tipping over when transported. If the
machine is transported in the tractor’s suspension, if required, the feed chute can be
set to the transport position, so that the machine takes up less space on the road.
However, this is not necessary in relation to the machine’s stability.