![background image](http://html1.mh-extra.com/html/p-lindberg/9065102/9065102_manual_744835065.webp)
6
MAN 9065102 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Safety labels
1.
Always keep the safety labels clean and legible.
2.
Replace missing or illegible safety labels.
3.
Parts that are used to replace parts that had a safety label attached must also have the
equivalent safety label attached.
4.
Each safety label shown in this user manual has a product number in the bottom right
corner. Use this product number when ordering as spare parts.
5.
Safety labels can be ordered from the supplier.
Attaching safety labels
•
Ensure that the surface on which the safety label is to be attached is clean and dry.
•
Ensure that the temperature is above 10°C.
•
Determine the precise position before you remove the backing paper.
•
Remove the smallest part of the backing paper.
•
Adjust the label position over the specified area and press carefully down on the small
part of the label that has no backing paper.
•
Next, slowly remove the remaining backing paper and carefully flatten/press the rest
of the label onto the surface.
•
You can puncture and smooth out any air pockets using a nail.
The safety labels and their positions are shown in subsequent illustrations. The
operator is required to make himself/herself familiar with the labels, the type of
warning and the area or the special function that the label relates to.