7
MAN 9047513 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK6600 Vejen
e-mail: [email protected]
Checking the oil supply:
After starting the motor, you should leave the chain to run at moderate speed and see
if the chain oil spreads out as shown in the diagram.
The volume of chain oil can be changed by inserting a screwdriver in the hole at the
bottom of the coupling side. Set the volume according to the working conditions.
The oil reservoir is normally almost empty when the fuel has been used up.
Remember to top up the oil every time you add fuel to the saw.
Adjustment screw
