4
| 16
Operating Instructions
Status as of 07/2013
3. Correct use of the charging station
3.1. overvieW and sTrucTure oF The charging sTaTion
In
Image 1
the P-CHARGE Stand-Alone can be seen in front view and open.
The individual components are annotated. To open the charging station, insert
key into the left hand cylinder lock
(Image 2)
. Once the charging station has
been unlocked, the lid can be pushed upwards and the doors can be opened.
The charging points are labeled in the following sequence (as viewed when
standing directly in front of the pillar) and correspond to the user buttons in
the doors:
3.2. The conTrol elemenTs
Some buttons have several uses. The respective functions can be seen in Table 1:
Button
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 7
The "E" button
may be labeled the
"S" button in the
display menu.
standard function
Socket top left
Socket top right
Socket bottom left
Socket bottom right
Language selection:
Toggle between Ger-
man (DE) and English
(EN)
C (Cancel) – Escape key:
Default confi guration is
restored
Reset cash box
memory
Menu
menu
Cursor down
Cursor up
Open menu
item
Close menu
item
Cancel Menu
pin input
PIN – digit 1
PIN – digit 2
PIN – digit 3
PIN – digit 4
PIN -
Confi rmation
Picture 1: Front view Stand-Alone
Picture 2: Exterior view Stand-Alone
Charging point 1
Charging point 2
Charging point 3
Charging point 4
Machine controller (Microcontroller)
Button "E" (also labeled in the display as "S")
RFID-card reader (alternative coin validator, to be used
if the button variant is not available)
Button 7
I/O circuit board
Power supply
EWS-Box 1/2 (Mode 2-Module)
Installation contactor, meter, combined RCD/MCB
Main line branch terminal
Installation in the circuit breaker box
Table 1: User component function
Display
Button 5
Button 6
Button 2
Button 4
Card reader / RFID
Coin validator
Button 1
Cylinder lock
Button 3
Identifi cation plate
