Page 18 of 30
Foxwing 270º Awning (LHS) Installation / User’s Manual OFW27AWLHA
18. Swing the Awning Poles (rear to front) so that they recess into the Backing Extrusion
18.1 Secure the Awning Poles using the Rubber Strap prior to folding the awning material, refer to
Diagram 18A
18.2 Fold the awning material, refer to Diagram 18
19. Neatly roll the awning up towards the Backing Extrusion until you see the two (2) corresponding
black plastic retaining clips and clip into place, refer to Item A in Diagram 19
19.1 Fold and neatly extend the Drain Panel (B) onto the top of the awning releasing the retaining
clips (A) one at a time to position the Drain Panel under the retaining clip straps, refer to Item B
in Diagram 19
19.2 Tensioning the awning by pulling the tails of the retaining clip straps
19.3 Clip the pole bag and the guy rope/peg bag into the associated retaining clips inside the
awning cover (if applicable) or store in the vehicle for later use
Diagram 19
Diagram 18
Secure the poles with the rubber strap before rolling awning material up
(see inset picture).
Fold the awning as shown on right.
18A
A
B
