Page 9 of 30
Foxwing 270º Awning (LHS) Installation / User’s Manual OFW27AWLHA
6. Adjust the position of the awning, paying careful attention to keep the rear overhangs to a minimum
6.1
Make sure that there is adequate space to swing open the awning and that any overhang does
not obstruct the rear tail gate or hatch
7. Tighten all nuts when completed as shown in Diagrams 7A or 7B (as applicable)
7.1
Ensure that the awning is secure and not interfering with the vehicles normal operation
7.2
Ensure that the Roof Racks are secure and not interfering with the vehicles normal operation
7A
7B
5. Adjust the position of the Crossbar Bracket and assembly to suit the Roof Racks on the vehicle as
shown in Diagrams 5A or 5B (as applicable)
5A
5B
Channel nut must sit across the
bar when tightened
Tighten
Tighten
