13
ENGLISH
Step 1
Lay mushroomed wing on the
ground or the Saucisse pack. It is best to
start from the mushroomed position as
this reduces the dragging of the leading
edge across the ground.
Step 2
Group Leading Edge (LE) plastic reinforce-
ments with the A tabs
roughly aligned, make sure
the plastic reinforcements
lay side by side.
Step 3
Strap LE...Note the glider is
NOT folded in half; it is folded with a
complete concertina from tip to tip.
It is really important to not stress
the middle cell or bend the plastic too
tightly.
Step 4
Group together the middle/
trailing edge of the wing by sorting the
folds near the B, C and D tabs.
If using a Saucisse pack go to Step 8
Step 5
Once the LE and rear of the
wing have been sorted, turn the
whole wing on its side.
Step 6
Fold the wing with 3 or 4
folds whilst being careful to not
crush the LE
Step 7
Nowplace the folded wing into
the stuff sack.
