DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Switch
SPTCS115-05
Safety
Guard
SPTCS115-35
Diamond
Blade
SPTCS115-43
Drain
Plug SPTCS115-48
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
min¯
Revolutions or
reciprocation per minute
n
o
No load speed
Warning
Wear eye protection
Wear hearing protection
Wear safety gloves
Use only non
fragmented blades
Read instruction manual
Caution, risk of cutting
Regulator compliance mark
5. GENERAL MAINTENANCE
IMPORTANT!
BEFORE CLEANING YOUR TILE CUTTING
SAW OR CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE MOTOR IS OFF AND THE TOOL
DISCONNECTED FROM THE POWER SUPPLY TO PREVENT
ACCIDENTAL STARTING.
• Keep the ventilation slots of the tile cutting saw clean at all times
and prevent any foreign matter from entering.
• If the housing of the tile cutting saw requires cleaning do not use
solvents but a moist soft cloth only.
• Blow dust from the tile cutting saw through the ventilation slots with
compressed air periodically to ensure a dust free tool.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tile saw by an unauthorised person
or by mishandling of the tool.
