INTRODUCTION
3
WARNING!
When using mains-powered equipment, basic safety
precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
This tool is double insulated in accordance with AS/NZS 60335-1;
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a qualified electrician or a
power tool repairer in order to avoid a hazard.
Note:
Double insulation does not take the place of normal safety precautions
when operating this tool. The insulation system is for added protection against
injury resulting from a possible electrical insulation failure within the tool.
Using an extension lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective. When using an extension lead
on a reel, always unwind the lead completely. Use of an extension lead not
suitable for the power input of the tool or which is damaged or defective may
result in a risk of fire and electric shock.
Congratulations on purchasing an Ozito Rapid Shredder.
We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years.
The RSH-100 Rapid Shredder has been designed for
shredding organic material such as dry plant residue,
twigs, sticks and branches up to 35mm thick. It is
intended for DIY use only.
ELECTRICAL SAFETY
!!
RSH-100 Manual.qxd 1/11/11 1:01 PM Page 4
Summary of Contents for RSH-100
Page 1: ......