8
ASSEMBLY (cont.)
5. Place the bush bearing (15) onto the wheel axle (17) (Fig. 5).
6. Insert the wheel (7) over the bush bearing (15) ensuring
that the larger inner diameter of the wheel is facing
outwards. This allows the wheel cap (8) to be fitted.
7. Place the small washer (14) onto the wheel axle (17)
followed by the locking nut (16). Secure the flat of the
wheel axle (17) with a 10mm spanner (not included)
and tighten the locking nut (16) using the
spanner/screwdriver (12), turn in a clockwise
direction (Fig. 7).
8. Place the wheel cap (8) onto the wheel (7) and click in
place (Fig. 8).
9. Repeat steps 4 to 8 for the opposite wheel.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
RSH-100 Manual.qxd 1/11/11 1:01 PM Page 9
Summary of Contents for RSH-100
Page 1: ......
