PXCSK-700
5. MAKING A CUT
6. BLADE FITMENT
OPERATION
2 Adjust the saw
depth and bevel
angle for the
desired cut.
4 Hold the saw
securely with both
hands and start the
tool.
1 Mark the cutting line on the work
piece.
3 Attach the rip fence for an
additional guide.
5 Move the saw through the
material to perform the cut.
Once complete, release the on/
off trigger and remove the saw
from the work piece.
Note:
Allow the saw to reach full speed before beginning a cut.
Note:
Never force the saw. Use light and continuous pressure.
1 Press and hold the spindle lock.
5 Fit outer blade flange and blade
bolt.
3 Retract lower blade guard fully.
4 Remove and replace blade.
Ensure arrows on the blade point
in the same direction as the
arrow on the upper blade guard.
2 Use hex key to rotate blade until
lock engages. Remove blade bolt
and outer blade flange.
6 Depress spindle lock and Tighten
blade bolt with the hex key.
The tool is recommended for wood cutting only and is not recommended
for use with abrasive wheels or masonry/diamond cutting wheels. Only use
150mm wood cutting blades.
