The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
CAUTION:
THE CHARGER FOR THIS PRODUCT SHOULD
BE PROTECTED BY A RESIDUAL CURRENT DEVICE
(RATED AT 30MA OR LESS).
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a flat
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a firm connection.
2 The charger LED will flash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator
Situation
GREEN (Flashing)
Stand By (no battery pack is inserted)
RED (Flashing)
Battery is charging (low charge)
RED (Illuminated)
Battery is charging (mid charge)
GREEN (Illuminated)
Battery is fully charged
BOTH(Illuminated)
Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing)
Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
KNOW YOUR PRODUCT
1. BATTERY & CHARGING
(sold separately)
SETUP & PREPARATION
CORDLESS CIRCULAR SAW
1
10
11
12
14 15
13
2 3
4 5 6
7
8 9
1 Battery Seating
2 Rear Handle
3 Dust Port
4 On/Off Trigger
5 Lock-Off Lever
6 Hex Key Holder
7 Front Handle
8 Bevel Locking Knob
9 Rip Fence Locking Knob
10 Depth Locking Lever
11 Blade Guard Lever
12 Lower Blade Guard
13 Blade
14 Upper Blade Guard
15 Cutting Guide Notch
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this Power X Change Circular Saw.
16 3.0Ah Battery
17 Fast Charger
BATTERY & CHARGER
16
17
