ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting The Side Handle
1. To fit, screw the side handle
clockwise into 1 of 2 handle
positions.
2. To remove, screw the handle
anti-clockwise.
Fitting The Safety Guard
1. Loosen the safety guard locking lever
to allow it to spin.
2. Align the notches, rotate the
guard into the desired position
and secure in place with the
locking lever.
WARNING!
DO NOT OPERATE THE ANGLE GRINDER
WITHOUT THE SAFETY GUARD FITTED AS POSSIBLE
INJURIES COULD OCCUR.
1.
Spindle Lock
2.
Side Handle
3.
Lock On Slide Switch
4.
Dust Guard / Ventilation Mesh
5.
Battery Seating
6.
Sure Grip Handle
7.
Grinding Guard
8.
Pin Wrench
9.
Guard Locking Lever
10. Grinding Disc
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or higher to
operate this PXC tool.
BRUSHLESS 125MM ANGLE GRINDER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5
6
8
7
9
9
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
