background image

PROBLEM SOLVING

Engine stopping suddenly  

or insufficient power

•  Check that there is fuel in the tank.

•  There may be water in the fuel mixture. Drain and rinse all 

the  

fuel system.

•  The air filter may be filled with dust. Clean the air filter.

CARING FOR THE ENVIRONMENT

Tools that are no longer usable should not be disposed of with 

household waste but in an environmentally friendly way. Please 

recycle where facilities exist. Check with your local council 

authority for recycling advice.

Recycling packaging reduces the need for landfill and raw 

materials. Reuse of recycled material decreases pollution in the 

environment. Please recycle packaging where facilities exist. 

Check with your local council authority for recycling advice.

Spare parts can be ordered from the Special Orders Desk 
at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit 
www.ozito.com.au or contact Ozito customer service 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

DESCRIPTION OF SYMBOLS

Read instructions

Wear safety glasses

Thrown objects can 

cause severe injury.

Regulator compliance mark  

    

  

 

 

 

 

 

    

    

    

 

 

 

    

/min

      Revolutions or 

 

    reciprocation per minute

   

Use at a distance of at least 

15m from other people.

n

o       

No load speed

Warning

   

    Diameter

WARNING. Rotating blades.

Wear muffs

Flammable material.

Do not put hands or feet 

under the cover of the 

machine when it is running.

Extremely hot surface.

Cubic Centimeters (the standard measure of displacement in

Europe and Asia)

cc

114

Sound pressure level

Ø

Summary of Contents for PED-3005









Reviews: