ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
16
15
11
10
9
The upper handle and lower handle need to be secured in place
before the unit can be used.
1. Place the lower handle
frame onto the engine frame.
Ensure that the holes in the
bars of both frames are in
alignment. Using two of the
handle lock knob and bolt
sets, fix both frames together.
The knobs should be
positioned on the inside of the
frame. Tighten them securely.
2. Attach the upper handle to
the lower handle frame with
the remaining two handle lock
knobs and bolts.
3. Use the cable ties (supplied)
to fasten the cable container
to the lower handle and upper
handle frame.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. Upper handle
2. Handle lock knob
3. Lower handle
4. Engine frame
5. Spark plug
6. Air filter cover
7. Air filter cover locking knob
8. Height adjustment lever
9. Recoil starter
10. Fuel tank
11. Wheel
12. Mudguard
13. Priming bulb
14. Cutting blade
15. Choke lever
16. Blade guard
17. Throttle lever
18. Throttle safety
19. On/Off switch
1. ASSEMBLY
PETROL EDGER
1
2
3
4
6
5
7
8
Securing the Handles
Securing the Mudguard
2. Secure in place with
supplied washer and nut.
1. Place the plate over the metal
threads on the rear of the
blade guard followed by the
rubber mudguard.
18 19
17
14
13
12
