Always disconnect the sharpener from the power supply prior to making any
adjustments or performing any maintenance.
Always wear eye protection.
Ensure replacement discs are rated at 4800/min or higher. Using a disc rated below the
speed of the sharpener is a hazard.
Rags, clothes and other loose catch-able objects should be kept away from the
work area.
If interrupted whilst operating the tool, complete the process and switch the tool off
before looking away from the machine.
Periodically check all nuts, bolts and other fixings are properly tightened.
Always turn the sharpener off when it is not in use and never leave it unattended
without first switching off and disconnecting the tool from the power supply. Never
leave the sharpener until the grinding disc has come to a complete stop.
When using the sharpener, use safety equipment including safety glasses, ear
protection, dust mask and protective gloves.
Warning!
Always ensure the sharpener is disconnected from the power
supply during assembly, mounting, setting and maintenance.
1. Insert the bolt of the table through the hole in the base as shown in Fig. A.
2. Secure the table in place fixing the locking knob to the bolt (by screwing the knob
clockwise) as shown in Fig. B.
ADDITIONAL SAFETY RULES FOR SHARPENERS
7
!!
ASSEMBLY
Fig. B
Fig. A
