![background image](http://html1.mh-extra.com/html/ozito/ltr-300/ltr-300_instruction-manual_1666832009.webp)
9
WARNING!
Before assembly, make sure that the line trimmer is switched off
and unplugged .
Fitting the edging wheel
1. Align both halves of the edging wheel (8) onto the
line trimmer housing as shown (Fig. 1).
2. Secure the edging wheel (8) in place with the two
screws supplied using a Phillips head screwdriver (Fig. 2).
3. When secured ensure that the edging wheel is free to
rotate on the housing.
Fitting the safety guard
1. Align the safety guard (7) with the screw holes in the
base of the motor housing and secure it with the two
screws supplied (Fig. 3).
WARNING!
Never use the line trimmer unless the
safety guard is properly fitted.
Fitting the auxiliary handle
1. Rotate the bracket to the
foreside of the main
handle (1) (Fig. 4).
2. Place the auxiliary handle
(12) on the bracket and
adjust the angle to a
comfortable position.
3. Insert bolt through the
bracket and auxiliary handle (12), screw the auxiliary handle locking knob (4) onto
the bolt. Do not overtighten (Fig. 5).
ASSEMBLY
!!
Fig. 1
Fig. 2
Fig. 3
Fig. 4
!!
Fig. 5
Align
Align
Secure
Secure
Align
Holes
Align
Holes
Handle
Bracket
4
Summary of Contents for LTR-300
Page 1: ......