12
OPERATION (cont.)
Trimming
WARNING!
Make sure that the work area is free of rocks, debris, lines and
other foreign objects.
Your line trimmer will work at its best if you observe the following instructions:
•
Never use the line trimmer without its safety devices.
•
Do not cut grass when it is wet. The best results are achieved on dry grass.
•
To switch ON your line trimmer, press the On/Off switch (2).
•
To switch OFF your line trimmer, let go of the On/Off switch (2).
•
Do not move the line trimmer against the grass until the switch is pressed, i.e.
wait until the line trimmer is running before placing in grass.
•
For the correct cutting action, swing
the line trimmer from side to side as
you walk forward, holding it at an
angle of approx. 30° as you do so.
•
Make several passes to cut long
grass shorter step by step from the
top (Fig. 10).
•
Keep the line trimmer away from hard
objects in order to avoid unnecessary
line wear.
Note:
Periodically clean out the grass between the spool and the rim of the guard to
prevent the tool from vibrating, ensure the line trimmer is switched off and unplugged.
Removing & replacing the spool & line assembly (Fig. 12a & Fig.12b)
WARNING!
Before making this change, make sure that line trimmer is
switched OFF and unplugged.
Replacement spool & line can be purchased from your local Bunnings store. The
Ozito ACCLT-05 spool & line is compatible with the LTR-300 line trimmer.
!!
Fig. 12b
Fi
g. 12a
a
c
g
e
g
g
f
!!
Fig. 10
MAINTENANCE
Summary of Contents for LTR-300
Page 1: ......
