Ozito LTR-300, Instruction Manual

Page: 14 / 16

14
MAINTENANCE (cont.)
• Keep the ventilation vents of the tool clean at all times, if possible, prevent
foreign matter from entering the vents.
• After each use, blow air through the tool housing to ensure it is free from all
dust particles which may build up. Build up of dust particles may cause the
tool to overheat and fail.
• If the enclosure of the tool requires cleaning do not use solvents but a moist
soft cloth only. Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Note: Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the tool by an unauthorised person or by mishandling of the tool.
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare Part Part No.
Spool Cover SPLTR300-01
Spool & Line ACCLT-005
SPARE PARTS
Warning Read instruction manual
V Volts Hz Hertz
~ Alternating current W Watts
n
o No load speed
Double insulated
/min Revolutions or reciprocation per minute
Regulator compliance mark
Wear eye protection
Wear hearing protection Keep bystanders away
Do not operate in the rain
Keep bystanders away Keep bystanders away
Disconnect and discontinue use should the power-cord be damaged
DESCRIPTION OF SYMBOLS