GGK-030
4. GLUING
Applying Glue
1 Hold the Nozzle against the surface to be glued and press the
Flow Control Trigger to deposit glue.
2 Press both surfaces together immediately and apply pressure.
Hold for 30 seconds to allow the glue to set.
Turn on the glue gun by plugging it into a mains powered outlet.
Allow the glue gun to heat up for approximately 5 minutes before
use.
WARNING!
THE GLUE GUN NOZZLE AND
HEATED GLUE GUN BECOME HOT WHILE
IN USE. IN THE EVENT OF ACCIDENTAL SKIN
CONTACT WITH HOT GLUE, RUN UNDER COLD
WATER IMMEDIATELY.
WARNING!
DO NOT ALLOW HOT GLUE TO
COME INTO CONTACT WITH THE PRODUCT
HOUSING DURING USE.
CAUTION!
THE TOOL IS RECOMMENDED
FOR USE WITH A RESIDUAL CURRENT
DEVICE WITH A RATED RESIDUAL CURRENT OF
30mA OR LESS.
CAUTION!
THE GLUE GUN HOUSING
BETWEEN THE NOZZLE AND HANDLE MAY
BECOME HOT DURING USE. THIS IS PERFECTLY
NORMAL, HOWEVER AVOID PROLONGED
CONTACT WITH THE AREA UNTIL THE GLUE GUN
HAS COOLED DOWN.
