©2005 by Senco Products, Inc. www.senco.com
Fastening Solutions
™
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
The SCN40DW Drywall Coil Nailer eliminates crooked nails and
shattered drywall. It's loaded with features that cut application time and
increase reliability. Has an 120 nail capacity for less down time in your
drywall installatons.
Item #: 650003N: Contact Actuation (Dual Action)
650003N: Sequential Actuation (Restrictive)
Weight: 4.7 lbs. ( 2.1 kg)
Height: 10-3/8" (264 mm)
Length: 9-3/4" (248 mm)
Nail Capacity: 120
Collation: Wire weld coil wire
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: TContact or Sequential Actuation
Hose Fitting: 1 ⁄4 " NPT
Drives 12.5 gauge (shank .099) , Full Round Bugle-Head Nails
1-1/2” – 1-5/8" 4d-5d ring shank. Capacity 120.
For drywall installation.
• Lightweight - 4.7 lb for easy one-handed operation, improving
productivity
• Adjustable depth-of-drive control on the tool means no compressor
adjustments or additional tools for adjustments are required
• Neverlube Design - requires no lubrication
SCN40DW
Coil Drywall Nailer
BG (.099)
1
1
/
2
1
5
/
8
For additional information on how SENCO Power Fastening Systems will save you time,
reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to
find your nearest Authorized Senco Dealer or Distributor.
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or
trigger fire) operates in the following a sequence - depress the safety
element at the nose of tool against the work surface then pull the trigger.
After each fastener is driven, release the trigger and lift the tool off the
work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or
bottom fire) operates in the following sequence- pull the trigger first and
keep the trigger pulled while moving the tool along the work surface
with a bouncing motion, depressing the safety element at the nose of
the tool against the work surface where the fastener is to be driven. This
trigger is recommended for use by trained professionals only in high
production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools
to ensure proper use and safety precautions or log on to
www.senco.com or call 1-800-543-4596 for more information on
SENCO’s trigger systems. Choose the right trigger system for your
specific needs!
��
�� � � � � �
� � � �
