ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. CHANGING NOZZLES
7 Glue Sticks x 4
8 Standard Nozzle
9 Profiled Nozzle
10 Long-Nosed Nozzle
ACCESSORIES
SETUP & PREPARATION
1 Nozzle Cover
2 Monitoring Window
3 Glue Stick Inlet
4 Glue Stick
5 Flow Control Trigger
6 Support Stand
GLUE GUN KIT
Installing New Nozzles
1 Remove the rubber Nozzle Cover by pulling it off the glue gun.
2 Unscrew the Nozzle by turning it anti-clockwise with a 13mm
spanner (not supplied).
Note:
Inspect the rubber O-Ring on the Nozzle for damage before
fitting it. If the O-Ring is worn, replace it before continuing to use
the Nozzle.
3 Fit the desired Nozzle onto the end of the glue gun and tighten it
by turning it clockwise.
4 Fit the Nozzle Cover back onto the new Nozzle.
The nozzle on this glue gun can be changed to better suit the task
at hand.
WARNING!
ENSURE THE TOOL IS
SWITCHED OFF AND ALLOWED TO COOL
DOWN BEFORE PERFORMING ANY OF THE
FOLLOWING TASKS.
1
2
3
4
5
6
7
8
9
10
