TROUBLESHOOTING
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist. Check
with your local council authority for recycling advice.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
Double insulated
V
Voltage
Regulator compliance mark
Hz
Hertz
n
o
No load speed
W
Wattage
/min
Revolutions or
reciprocation per minute
Warning
Keep bystanders away
Keep hands out of the openings while the tool is running
m
3
Metres cubed
Disconnect from power supply
when performing maintenance
Wear eye protection
Do not use in wet weather
Read instruction manual
before use
Disconnect and discontinue use
should the power-cord be damaged
104
Sound power level
Wear hearing protection
~
Alternating current
IPX4
Ingress protection from water
CARING FOR THE ENVIRONMENT
MAINTENANCE
WARNING!:
MAKE SURE THAT THE GARDEN VAC IS
SWITCHED OFF AND UNPLUGGED. WAIT UNTIL THE
IMPELLER HAS STOPPED BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
Clearing debris
• There are no user serviceable parts in the Garden vac; if a fault is suspected
or the supply cord requires replacement, return the Garden vac to a power tool
repairer.
• The collection bag is a consumable item. Check frequently for wear and
deterioration. As a result it will need replacing from time to time.
• Keep air intake clean and air vents free from debris to avoid overheating the
motor.
• Do not use cleaning agents to clean the plastic parts of the Garden vac. A
mild detergent on a damp cloth is recommended. Water must never come into
contact with the Garden vac.
• If the Garden vac vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation could lead
to injury or damage.
• No lubrication is necessary as the motor is equipped with lifetime-lubrication
bearings.
• Keep the ventilation vents of the Garden vac clean at all times, if possible,
prevent foreign matter from entering the vents.
• After each use, blow air through the Garden vac housing to ensure it is free from
all dust particles which may have built-up. Build up of dust particles may cause
the Garden vac to overheat and fail.
• If the enclosure of the Garden vac requires cleaning do not use solvents but
a moist soft cloth only. Never let any liquid get inside the Garden vac; never
immerse any part of the Garden vac into liquid.
• When not in use, the Garden vac should be stored in a dry, frost free location not
within the reach of children.
Note: Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the blower vac by an unauthorised person or by mishandling of
the blower vac. This tool is designed for DIY use - use in commercial or industrial
environments will void the warranty.
If air speed power decreases, remove build up of debris from
discharge outlet.
2. Unhook bag from the handle
3. Remove any debris from
discharge outlet.
DESCRIPTION OF SYMBOLS
Problem
Cause
Remedy
Poor Suction
Collection bag full
Empty the collection bag.
Clogged discharge
outlet
Remove any debris or build
up within the discharge
outlet.
Clogged vacuum
inlet
Remove build up of debris
from in the inlet housing.
1. Rotate connector
handle downward, then
pull away to remove.
