¥
For the highest ground
clearance (16mm), locate the
guide wheel axle back into the
slot closest to the rear wheels
(1).
¥
For the lowest ground
clearance (8mm), locate the
guide wheel axle forward into
the slot closest to the front of the
Garden vac (2).
2. PREPARATION
Vacuum height adjustment
Extension cord retainer
3. Once fitted, connect the
extension lead socket onto the
Garden vac’s power plug.
1. Make a loop with the
extension lead (socket end
of lead), push it through
the hole in the rear of the
switch handle.
To turn the Garden vac on,
depress the trigger switch.
WARNING!:
THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE RATED AT 30mA OR LESS.
Turning ON/Off
To turn the Garden vac off,
release the trigger switch.
The cord retaining hook is used to “anchor” an extension lead
(not included) when it is connected to the power cord of the
tool. It prevents the extension lead from being accidentally
disconnected from the Garden vac’s power cable or shaken
loose during use. It should be used at all times.
1
2
NOTE:
Only use Heavy Duty extension lead suitable for outdoor
use with electric garden tools, no longer than 25 meters.
WARNING!:
MAKE SURE THAT THE GARDEN VAC IS
SWITCHED OFF AND UNPLUGGED. WAIT UNTIL THE
IMPELLER HAS STOPPED BEFORE ADJUSTING THE
HEIGHT.
1. Place the Garden vac on its
side.
2. Pull the wheel axle from the
housing.
3. Locate the guide wheel
axle into the desired height
adjustment position.
2. Place the loop onto the
cord retainer.
RETAINER
RETAINER
RETAINER
1
2
Securing the power cord to the handle
Secure the power cord running
from the switch handle to the
body of the garden vacuum by
using the cord clip.
